Industrial Sodium Formate Powder

Industrial Sodium Formate Powder – High-Purity Chemical Solution for Drilling, Leather & De-icing Industries

Shanxi Zhaoyi Chemical Co., Ltd. is a chemical maker you can count on. The company was set up in 1988 and has been making chemicals ever since. Our production plant covers 27,000 ㎡ and follows a standardized layout. Yearly output holds at 150,000 tons. What we supply is Industrial Sodium Formate Powder. Its CAS number is 141-53-7, and it comes as a white crystalline organic salt. Buyers can choose from three main purity grades: 92%, 95% and 98%. Water solubility is high, at 97g/100ml at 20°C. The melting point sits at ≥253°C, which means the product keeps its thermal stability under heat. Oilfield drilling is one common use. Leather tanning is another. Textile dye works, concrete producers and de-icing projects with green goals also depend on it. Our certified product has cleared ISO, KOSHER and HALAL qualification audits. It gets rid of headaches that show up again and again in industry, like corroded equipment, reservoir formation damage, and pressure to meet environmental rules. Industrial clients around the world get stable, dependable performance from it.

Key Features & Benefits

High Thermal Stability Up to 253°C, our this product keeps its physical and chemical structure intact. Deep-well drilling runs under extreme heat, and this product handles those conditions without trouble. Temperature swings will not kill the product or drag down fluid performance. Plain chemical additives cannot match that level of stability.

Reducing Properties Active formate ions give the product a strong, steady reducing capacity. Precious metal precipitation is one field where that matters. Leather chrome tanning and fine chemical synthesis are others. Reactions run to completion and stay consistent. Batches of the finished product come out more uniform as a result.

Eco-Friendly Formulation Traditional chloride chemicals corrode badly. This product breaks down easily in nature, and its COD emissions are very low. It fully meets strict global environmental discharge standards. That helps enterprises cut environmental treatment costs and reach green production.

Excellent Solubility Profile It features rapid and complete water solubility, with a specific gravity of 1.92 g/cm³. It can be formulated into solids-free high-density brines with a maximum density of 1.3 g/cm³, ensuring stable and uniform performance in various industrial fluid systems.

pH Buffering Capacity Mix it at 10% in water and the pH stays put between 7.0–8.5. Even in acidic conditions, the buffering holds up well. Corrosion on equipment drops as a result, both during pickling and in mineral processing. Your production gear also lasts longer.

Technical Specifications

How It Works

Industrial Sodium Formate Powder works in three main chemical ways. Each way does its own job. That is why it fits so many different industrial uses.

When it gets prepared out in the oilfield, drilling fluid turns into high-density brines. No solids sit inside them. Shale hydration stops because of these brines, and the stratum stays free of swelling. Formate ions hold stable. Wellbore pressure holds steady as a result. Nothing abrasive ever appears. Permeability in the reservoir stays protected, and formation damage does not happen.

When hides are tanned, this product acts as a basifying agent. It also pushes chrome exhaustion along faster. During pickling and tanning, the pH stays where it should be. Chrome then works its way through the hide in a more even way, and more of it gets used up. The tanning cycle drops by 15%-20% as well. From start to finish, leather quality holds steady.

On infrastructure, de-icing is one of its jobs. Water freezes at a lower point thanks to it. Over the long haul, corrosion stays away as well. Chloride deicers of the traditional kind act in a different way. Steel facilities take no electrochemical corrosion damage from it. Aircraft aluminum parts are safe too.

Applications

Oilfield Drilling Fluids: Work in high-pressure oil and gas formations is a good fit for it. Completion fluids made with it can reach a density of 1.3 g/cm³. Drilling carries on safely and stays stable. Damage to the reservoir is kept to a bare minimum.

Leather Processing: Use it in chrome tanning and results get better. Tanning runs faster. The dye spreads evenly through the hide as well. Batch to batch, the finished leather comes out the same.

Textile Industry: In vat dyeing it acts as a reducing agent. It also works as a catalyst when reactive dyes bond to cotton fabric. Dyeing fastness goes up because of this. Product yield does too.

Concrete Additives: In cold weather, the cement hydration reaction speeds up with it. That solves the slow setting problem on winter building jobs. Precast concrete also gets much higher early compressive strength.

Snow & Ice Management: Airport runways rely on it a lot. Highways and bridge decks do too. Ice melts fast, and it will not come back. Metal and concrete structures also stay safe from corrosion.

Industrial Sodium Formate Powder vs Other Products

Certifications & Compliance

Our factory has obtained ISO 9001 quality management system certification, together with KOSHER and HALAL international certifications, supporting food-contact auxiliary production standards. All products are produced in strict accordance with the national GB/T 23937-2009 industry standard, and fully comply with EU REACH regulatory requirements, meeting the market access standards of most countries and regions around the world.

Packaging Options

Standard Packaging: Every bag holds 25kg. The bag itself is made of multi-layer kraft paper, with a PE liner inside that keeps moisture out. Because of that, the product does not cake. Small and medium batch orders usually fit this option.

Bulk Packaging: Each FIBC jumbo bag holds 1000kg. A PE liner comes inside every one of them. These bags fit big industrial lines that run without stopping, and machines take care of the moving. Unit packaging and logistics costs fall because of that.

Custom Solutions: Bags made to your own specs. Moisture-proof PP woven bags are part of what we turn out, and private label packaging is something we handle too. Buyers all source in different ways, so your order gets shaped around yours.

Manufacturing Process

We adopt advanced CO and sodium hydroxide pressurized direct synthesis technology, which effectively reduces organic impurities and ensures high-purity product quality up to pharmaceutical grade. Our 27,000 ㎡ production base is equipped with automated continuous crystallization production lines and multi-point quality inspection systems.

Each batch of products will undergo strict sampling tests on purity, moisture content and particle size distribution before packaging and delivery. We adopt closed-loop water recycling and carbon dioxide capture technology in the production process, which not only stabilizes product batch consistency, but also realizes energy saving and emission reduction green production.

Why Choose Us

With 36 years of professional formate manufacturing experience, our Industrial Sodium Formate Powder products have been exported to more than 40 countries and regions in Europe, America and Asia. The stable annual output of 150,000 tons completely avoids supply shortages and delivery delays during peak demand seasons.

Our chemical engineering team covers the whole job from start to finish. Designing a drilling fluid? We give you formula guidance aimed at your case. Leather tanning can be tuned as well, and de-icing solutions get debugged with us. Problems that show up on the production line do get solved.

Our factory is based in Shanxi. That location helps us on logistics. Trains run from there straight to the main ports. A small sample batch or a full container load, both get a delivery plan that fits. So goods leave on time.

FAQ

Q: How long does your sodium formate powder keep?

A: A1: An unopened pack keeps for 12 months. Store the product below 30°C and leave it sealed. Humidity needs to stay under 60%. Once the validity period is over, check it again before use.

Q: When concrete gets made, can sodium formate take the place of calcium formate?

A: A2: No. That swap does not work in every case. It comes down to your own mix recipe. The aggregates you pick matter too. In some recipes, sodium formate can set off alkali-silica reaction problems.

Q: While this product is on the road, does the logistics side need to handle it in any special way?

A: A3: No. HS Code 291512 places it in the non-hazardous chemical group. Sea transport follows the normal route. Land and air shipments are the same. A complex dangerous goods declaration is not required.

Q: When the water is cold and the temperature is low, how quickly does it dissolve?

A: A4: A light stir in 10°C cold water does the job. The product dissolves fully in 3-5 minutes. It dissolves fast. That makes it efficient for quick on-site use.

Q: What is your minimum order quantity?

A: A5: Our MOQ is 1 ton for trial orders. We support large-volume container orders and provide more favorable bulk pricing for long-term cooperative customers.

Request a Quote

Send your Industrial Sodium Formate Powder inquiry now: sxzy@sxzhaoyi.com